How to fix a toilet flush button [A guide]

The working function of the flush button on your toilet is something which you likely take for granted, until it stops. Before you find yourself reverting back to the old bucket-of-water trick, take a read through our step-by-step guide. It may be that, with the help of our professional advice, fixing the flush button isn’t as hard as it seems… The following steps are appropriate for both standard and water-saving flush buttons.

What you’ll need

• A new flushing mechanism purchased from your local DIY store
• A flat head screwdriver
• A towel
• A cloth
• A pair of pliers

Step 1: Turn off your water supply

Locating your stopcock and turning off your water supply is crucial before carrying out any of the following steps. This is likely to be found under your kitchen sink but the location can vary from home to home.

Step 2: Remove the elements

Lift the cistern lid off carefully, disconnecting the refill tube at the same time. Place this somewhere safe whilst you carry out the following steps. By unscrewing a nut toward the back of the cistern, you will find that you are able to remove the existing button in place. Once this has been lifted out, use your towel or cloth to clean the edges of the hole. This will make it ready for the new button, allowing it to be put in place with ease.

Step 3: Remove the water

Whether you choose to scoop remaining water out with a cup or jug or flush the system, you will need to remove as much of the water as you can. With the water removed, you’ll be able to remove the tank.

Step 4: Remove the tank and cistern

To fit the new flush button, the water tank will first need to be removed. With your screwdriver, carefully remove the screws that hold the tank against the wall, as well as those underneath the tank. Gently lift the tank off of the wall and away from your toilet. You’ll see the pipe that feeds water to the tank and will want to remove this. From here, you’ll be able to remove any remaining water found at the bottom of the tank. Place your towel over the lid before placing the cistern on top.

Step 5: Remove and assess your components

Locate the round rubber washer at the bottom of the cistern and carefully use your pliers to remove the ring, the nut which holds the flushing device in place, and the metal clamp.

Step 6: Remove and replace

It is likely that the flush valve has been secured in place for a long time. Therefore, if you struggle, use the pliers with care. It may need a light twist left and right before it comes loose. Once removed, you can then fit the new flushing mechanism. Take it out of its packaging and remove its rubber washer. Move the new seal upwards to allow it to sit snugly in its place in the unit. Secure the valve through the cistern and return the metal clamp before deciding which rubber washer to fit – the old or the new. Only use the old washer if you are certain on it being in good condition.

Step 7: Replace the cistern

Replace the nuts and bolts to position the cistern back in its original place securely. These will be needed on the underside and the back. Once you are confident that everything is back in place as it should be, replace the water refill tube.

Step 8: Test the flush valve

Check that the float is able to move freely with the positioning of the valve. You won’t be able to test with running water until you turn the water supply back on.

Step 9: Fit the flush button

At this stage, you will be able to fit the flush button. You can do this by unscrewing the bolt at the back, fitting the button and replacing the nut. Connect the button to the system, place the cistern lid back in place and you’re done. Remember to turn the water supply back on! If you find that your toilet flush button still doesn’t work or your toilet is failing to flush at all, it may be time to call in the help of the professionals. Give our Bromley Plumbers team a call on 0208 050 2707 to arrange for a visit from one of our expert plumbers. You can hire a local plumber in Beckenham and all the nearby areas. Contact Today!